Cancel



First Name:
Last Name:
Company:
Phone:
Email:
Product:
Message:


Put the text in the image above in this text box.

Yes, I want to create an account to make my future requests and quotes even easier.
 
 
 
Get a Quote
Country
Zip/Postal (US & Canada)


    

Country

Zip/Postal (US & Canada)


    

Country

Zip/Postal (US & Canada)


    


CG Girder Turning Clamps
The above picture may not be
an exact representation of the product

CG Girder Turning Clamps

WLL: 250 to 13,200 lbs.


CG Clamps can lift and turn girders through 90º and are designed to meet the requirements of the heavy steel industry. These general purpose clamps can be used on rolled steel joists, beams, and fabrications up to a surface hardness of 300 Brinell (32HRc).

  • Can be used on beams, fabrications, channels and rolled steel joists
  • Can lift and turn beams up to 90º and are designed to land the beam in either the vertical or horizontal position.
  • Fitted with a cam/spring-operated safety lock
  • Incorporates a positive lock onto one of the uppermost edges, which will allow the beam to be set down with the flange vertical
  • For long girders, fabrications and welded structures, two clamps and a lifting beam may be required
  • Design factor 4:1
CG Girder Turning Clamps
Product Code Working Load Limit Jaw
Capacity (in.)
Dimensions (in) Weight
(lbs)
Minimum (lbs) Maximum (lbs) A B C D E F G H I
CG1 250 2,200 0 to 5/8 8.307 3.543 1.969 0.512 1.693 10.354 2.520 13.780 13.268 13.2
CG2 450 4,400 0 to 1-1/4 11.417 5.512 3.150 0.787 2.362 12.480 3.937 18.307 17.126 30.9
CG4 900 8,800 0 to 1-1/4 11.417 6.339 3.504 0.787 3.031 12.835 4.252 20.591 18.976 41.9
CG6 1,350 13,200 7/16 to 2 13.268 6.732 3.504 0.984 4.055 14.764 5.709 21.693 20.630 81.6